Markets Served and Case Histories

 

   Overview

   Tank Lining

   Corrosion Protection

   Ponds and Reservoirs

   Decks and Pavements

   Environmental Systems

   Roofing

   Cooling Tower Flyer

CIM high performance coatings and linings are used in applications ranging from roofing and decking to tanks and reservoirs. A continuous 60-100 mil layer of CIM is easily applied with a squeegee, roller, trowel or spray equipment, with minimal surface preparation. Seamless application reduces installation and maintenance labor dramatically. Successful field applications have been in constant service since 1970.

                                 

 

Tank Lining

CIM tightly adheres to all tank surfaces, providing a flexible, elastomeric barrier to water and chemical attack. For steel and concrete tanks and pipe linings, for potable water, chemical effluents, and cooling water.

CIM Case History #12: Concrete Wastewater Tank

CIM Case History #17: Potable Water Reservoir

                                                                                                                                  Back To Top

 
 Corrosion Protection
CIM provides 4-season protection against water and corrosion on concrete pilings, cooling tower bases, slats and supports, loading bay fenders, silos, ship decking and other marine structures, plus steel or reinforced concrete subject to harsh chemical atmospheres including secondary containment systems.

CIM Case History #16: Bolted Steel Leachate Tank

CIM Case History #18: Water Softener Tank

                                                                                                                                  Back To Top

 
  Ponds and Reservoirs

CIM assures watertight containment on virtually any scale from wash tanks to reservoirs including potable and agricultural water systems, collection basins, flumes, spillways, hatcheries, dam faces, tank farm containment and decorative ponds and fountains over rough soils, pavements or concrete liners.

CIM Case History #15: Potable Water Reservoir Liner

CIM Case History #14: Asphalt Lagoon

CIM Case History #13: Lining for Decorative Ponds

CIM Case History #19: Multi - Substrate Application

CIM Case History #21: Fountain Basin and Liner

CIM Case History #22: Earthen Containment Area

                                                                                                                                  Back To Top

 
Decks and Pavements
CIM combines abrasion resistance and waterproofing to protect against water and corrosion on bridge, pedestrian and parking decks, protects utility flooring in severe applications such as food processing plants, wineries, sugar and salt refineries, animal stalls, water and sewer treatment plants and chemical plants with acidic and basic reagents.

 

CIM Case History #20: Concrete Parking Deck

CIM Case History #23: Waterproof Parking Deck

                                                                                                                                  Back To Top

 
Environmental Systems

CIM forms an ideal barrier to aqueous solutions including drainage ditches, catch basins, mine drainage, sewage treatment lagoons, sanitary landfills, even where paper mill effluent or spent acids are present.

CIM Case History #15: Bolted Steel Leachate Tank

CIM Case History #18: Water Softener Tank

                                                                                                                                  Back To Top

 
Roofing

CIM cold applied roof coatings create a waterproof barrier over plywood, metal, concrete, insulation board, foamed insulation, and BUR.  CIM forms a seamless roof system around vents, penetrations and irregular shapes.  CIM is also an excellent gutter material.

CIM cements and adhesives are commonly used with traditional modified and built up roof systems.  CIM cements cure to form watertight seal around penetrations (pitch pockets), base flashings, terminations, and vertical seams.  CIM adhesives are used to adhere insulations boards, cover boards, base sheets, cap sheets and single ply membranes.  Other advantages for roof applications include fast cure times, low odor, low VOC's, tremendous bond strength, and cold application.

CIM Case History #17: Potable Water Reservoir

                                                                                                                                  Back To Top

Keeping Liquids Where They Belong

Wastewater Treatment Plants
Aeration Basins, Primary/Secondary Chemical Containment, Clarifiers, Digesters, Equalization Basin, Lift Stations, Lagoons, Pump Stations, Sedimentation Basins, Sludge Tanks
Water Treatment Plants
Primary/Secondary Chemical Containment, Chlorine Contact Chambers, Clarifiers, Filtration Systems, Potable Water Tanks, Pump Stations, Reservoirs, Sedimentation Basis, Water Softeners
Chemical Treatment Plants
Tank Farm Containment, Collection/Catch Basins, Drainage Ditches, Mine Tailings Ponds, Paper Mill Effluent
Waterproofing
Below Grade, Between Slab, Bridge Decks, Planter Boxes, Ponds, Roofs, Tanks, Waterscapes, Steel-to-Concrete Joints Sealing
Decks and Pavements
Parking Decks, Pedestrian Decks, Bridge Decks
Corrosion Protection
Steel, Concrete, Marine Environment
Roofing
Roof Coatings, Repairs, Gutters, Penetrations, Pitch Pockets, Base Flashings, Terminations, Adhesives for Modified Bitumen, Single Ply and Insulation
Other Uses
Cooling Towers, Decorative Ponds and Fountains, Methane Barrier, Runways, Helipads, Hatcheries, Silos, Joint Sealing, Repairing Other Liner Failures

CIM High Performance Coatings and Linings

                                                                                                                                            Back To Top


Email: information@cimind.com
Telephone: 800-543-3458 + 603-924-9481 + Fax 603-924-9482
Write: C.I.M. Industries Inc.  23 Elm St., Peterborough, NH 03458 USA